25
PROGRAMMING MODE - SETUP MODE
Setup Mode : (display)
You can change washer vend price, cycle time, and cycle parameters, etc.
Entering set up mode
- Coin type – Turn on/off toggle switch.
- Card type – Insert the service card.
- OPL type – Push “WHITES” + “DELICATES” and the ‘3’.
- Then, the washer displays .
1. How to change regular price.
Entering set up mode.
You will see LqC1
Button Display
Press the
WHITES
button.
Press the
COLORS
or the
DELICATES
button until appears in the display.
Press the
START
button.
Press the
START
button.
Display previous regular price.
Press
COLORS(+)
or
DELICATES(-)
button to set the regular price.
(The vend price can be set from 0 to 10.00 in 1$ increments.)
Press the
START
button.
The machine sets up the regular price, then advances to the next process
automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
To Next Page
Loading...
Need help?
General
