Before servicing ask troubles of customers
Check the adjustment(power supply is 110V a.c, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance whether it works O·Kor NOT.
■ STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT INSTALL THE APPLIANCE ADJUST THE
BOLTS ON FLAT AND FIRM SURFACE
LEVELING
Remove the transit bolts
(4EA:①)with supplied spanner.
Keep the transit bolts and
spanner for future use.
Insert the 4 caps
provided into the hole
4. INSTALLATION
8
Turn the leveling feet to adjust the
appliance.
Turn clockwise to raise;
counterclockwise to lower.
To Next Page
Loading...
Need help?
General
