24
How to use washer
• Spin Speed level can be selected by
touching 'Spin' button repeatedly.
• Spin Only
1. Touch the Power button.
2. Touch the Spin button to select RPM.
3. Touch the Start/Pause.
• Time Save ( ) :
This option can be used to reduce the time
of a wash program.
It is best used on lightly soiled loads.
• Intensive ( ) :
If the laundry is normal and heavily soiled,
“Intensive” option is effective.
Wash ( )
Spin
• By touching the Temp. button the water
temperature can be selected.
- Cold (0)
- 20°C, 30°C, 40°C, 60°C, 95°C
• Water temperature can be selected
according to the program.
Temp.
• Rinse plus ( ) :Add rinse once.
Rinse ( )
1. Touch the Power button.
2. Select a cycle.
3. Touch the Time Delay button and set time
required.
4. Touch the Start/Pause button.
You can set a time delay so that the washing
machine will start automatically and finish
after a specified time interval.
Delay ( )
NOTE
• The delay time is the time to the end
of the programme, not the start.
The actual running time may vary
due to water temperature, wash load
and other factors.
When you select "No Spin(0)", it will still
rotate for a short time with low speed to
drain quickly.
NOTE
To Next Page
Loading...
Need help?
General
