LG F1443KD User Manual

10
1. Unscrew the adapter ring plate and
the 4 adapter retaining screws.
2. Remove the guide plate if the tap is
too large to fit the adapter.
3. Push the adapter onto the end of
the tap so that the rubber seal forms
a watertight connection.
Tighten the adapter ring plate and
the 4 screws.
4. Pull the connector latch plate down,
push the inlet hose onto the adapter,
and release the connector latch plate.
Make sure the adapter locks into place.
nstallation
I
After completing connection, if water leaks from the hose, repeat the same steps.
Use the most conventional type of faucet for water supply. In case the faucet is square
or too big, remove the spacing ring before inserting the faucet into the adaptor.
Please use the horizontal tap
Horizontal tap Extension tap Square tap
Ring plate
Guide plate
Latch plate
Type-C : Connecting one touch type hose to tap without thread
❿ Step3: Connect hose to washer
• Make sure that there are no kinks in the
hose and that they are not crushed.
❿ When your washer has two valves.
• The Inlet hose which has red connector is
for the hot water tap.
• If the washer has two valves, the energy is
saved by using hot valve.
After connecting hose to water
tap, turn on the water taps to
remove foreign substances in the
water hoses.
Remove dirt, sand and sawdust
remaining in the tap pipes or
water hoses, let water drain into
a bucket, and check the water
temperature.

LG F1443KD Specifications

General

Water consumption per cycle	77 L
Energy consumption washing per cycle	1.65 kWh
Loading type	Front-load
Product color	White
Door opening angle	170 °
Appliance placement	Freestanding
Drum capacity	11 kg
Cycle time (max)	90 min
Maximum spin speed	1400 RPM
Number of washing programs	14
Washing class	A
Annual water consumption washing	12000 L
Annual energy consumption washing	256 kWh

Weight and Dimensions

Depth	600 mm
Width	640 mm
Height	842 mm
Weight	70000 g