LG F1443KD User Manual

9
nstallation
I
1. Unscrew the adapter ring plate and the 4
adapter retaining screws.
2. Push the adapter onto the end of the tap
so that the rubber seal forms a watertight
connection. Tighten the adapter ring plate
and the 4 screws.
3. Push the water supply hose vertically
upwards so that the rubber packing within
the hose can adhere completely to the
tap and then tighten it by screwing it to
the right.
• Water supply pressure must be between 100 kPa and 1000 kPa (1.0 ~ 10.0 kgf / cm
2
)
• Do not strip or crossthread when connecting inlet hose to the valve.
• If the water supply pressure is more than 1000 kPa, a decompression device should be
installed.
• Periodically check the condition of the hose and replace the hose if necessary.
Type-A : Connecting Screw-type hose to tap with thread
• Screw the hose connector onto water
supply tap.
■ Connecting water supply hose
❿ Step1 : Check rubber seal inlet hose
❿ Step2 : Connect hose to water tap
• Two rubber seals are supplied with the
water inlet hoses.
They are used for preventing water leaks.
Make sure the connection to taps is
sufficiently tight.
Upper
connector
Rubber
packing
Plate
Water supply
hose
Fixing screw
Hose
connector
Rubber
seal
Type-B : Connecting Screw-type hose to tap without thread

LG F1443KD Specifications

General

Water consumption per cycle	77 L
Energy consumption washing per cycle	1.65 kWh
Loading type	Front-load
Product color	White
Door opening angle	170 °
Appliance placement	Freestanding
Drum capacity	11 kg
Cycle time (max)	90 min
Maximum spin speed	1400 RPM
Number of washing programs	14
Washing class	A
Annual water consumption washing	12000 L
Annual energy consumption washing	256 kWh

Weight and Dimensions

Depth	600 mm
Width	640 mm
Height	842 mm
Weight	70000 g