29
EN
Option Programme
Delay End
You can set a time delay so that the washing
machine will start automatically and finish after a
specified time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button to set time
required.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• To cancel the function, the power button should
be pressed.
• Avoid using liquid detergent for this option.
Pre Wash ( )
If the laundry is heavily soiled, the Pre Wash
programme is recommended.
1
Press the Power button.
2
Select a washing programme.
3
Press the Pre Wash button for three
seconds.
4
Press the Start/Pause button.
Steam (Optional) ( )
Steam Wash features enhanced washing
performance with low energy consumption.
Steam Softener sprays steam after a spinning
cycle to reduce creases and make the laundry
fluffy.
1
Press the Power button.
2
For Steam Wash option, select steam
programmes.
3
Press the Steam button.
4
Press the Start/Pause button.
Wi-Fi ( )
Set the Wi-Fi connection. When Wi-Fi is
connected, the Wi-Fi icon on the control panel
is lit.
Temp.
The Temp. button selects the wash and rinse
temperature combination for the selected cycle.
Press this button until the desired setting is lit. All
rinses use cold tap water.
• Select the water temperature suitable for
the type of load you are washing. Follow the
garment fabric care labels for best results.
To Next Page
Loading...
Need help?
General
