Getting Started14
Getting Started
1
Mounting the main unit
on a wall
You can mount the main unit on a wall.
Install the wall mount bracket on a solid wall
perpendicular to the oor.
If you are attaching the unit to other building
materials, please contact qualied personnel to install
the wall mount.
Only use the wall mount bracket supplied with this
unit.
Attach the cables to the unit rst, then attach the
unit to the mount.
Before Installation
y
Do not use the wall mount bracket for any purpose
other than installing the sound bar on a wall.
y
Immediately discontinue installation and contact
the service center if you cannot fully understand
the installation process. Use a professional installer
if any installation issues remain after the inquiry.
y
Installation of this product on concrete wall is
recommanded. Installation of this product on other
surfaces (Wood Stud, dry wall, plywood, bricks,
etc.) is not recommanded. Improper installation
may result in the product falling.
y
Install the product only on a vertical wall. Do
not install on a tilted wall that exceeds building
standards or on the heavily titled wall or ceiling. LG
is not responsible for problems caused by improper
installation of the product, e.g., heavily tilted walls
and ceilings.
y
Check the enclosed accessories before installation.
We are not responsible for any lost or damaged
accessories after the inner packaging is opened.
y
When an infant or small child swallows the
enclosed accessories, various safety accidents
such as choking may occur. Keep the enclosed
accessories out of the reach of infants and
children.
y
When tightening screws, tighten until fully snug.
Avoid using excessive force when tightening
the screws. Doing so may damage the wall and
product or reduce the rigidity or performance of
the product.
y
Avoid installing the unit that exceeds the specied
tensile load, and do not allow any external force to
be applied to the product.
y
Avoid accidents by using work tools with care
during installation.
y
Because it is difcult to make a connection after
installing this unit, you should connect the cables
before installation.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
