24 OPERATION
Control Panel
Control Panel Features
Top view
Front view
a Power On/Off Button
• Press this button to turn the washer on or off.
• After the cycle is complete, the power automatically turns off for purposes of safety and economy.
• If there is a power surge, power outage, or disruption of any kind, power is automatically turned off
for safety.
• When power is connected again, the dishwasher will turn on automatically and resume the cycle.
b Option Setting Mode
• You can set various options by using the Option Setting Mode.
• While a appliance is off, press Power and Remote Start simultaneously to enter the Option Setting
Mode.
• Refer to the Using Option Setting Mode topic for each function of the Option Setting Mode.
c Display
• Rinse Aid Refill
- This LED illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse
aid is refilled or the level is set to 0.
- To adjust the rinse aid level, refer to the Using the Option Setting Mode topic.
• Machine Clean
- The Machine Clean LED flashes every 30 cycles. To activate or deactivate the LED, refer to the
Using the Option Setting Mode topic.
•
8:88 : Digital Display
- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and
options are selected, the display shows the total estimated time to complete those selections.
During operation, the display shows the remaining estimated operating time.
• The estimated time shown on the display does not include delay times for heating water, etc.
us_main.book.book Page 24 Tuesday, July 5, 2022 1:32 PM
To Next Page
Loading...
Need help?
General
