27OPERATION
ENGLISH
Refresh
This cycle freshens up and warms dishes that have
been unused for a long time.
• Do not use detergent when using this cycle.
• The steam option cannot be turned off on this
cycle.
Download Cycle
Use a dedicated cycle downloadable via Wi-Fi or
NFC. You must install the LG ThinQ smartphone
app to download cycles other than the default
Machine Clean cycle.
• Only the cycle code for the current Download
Cycle appears on the appliance. See the
smartphone app for cycle codes, names, and
more information about the available cycles.
- Default Cycle : P1-Machine Clean
• Machine Clean (P1)
This cycle is for cleaning the inside of the
dishwasher. Use the cycle without dishes in the
machine. It eliminates residual soils, odor, white
spots, and other dirt. Add citric acid or another
cleaning agent for more effective results.
• Express (P2)
This cycle will quickly clean lightly soiled dishes.
- This cycle does not have drying.
• Rinse (P3)
This cycle is a quick rinse for dishes that will not
be washed immediately. The cycle rinses dishes
that have excess soil to soften dried on residue.
Rinsing the dishes helps prevent odors in the
dishwasher. No detergent should be used.
- This cycle does not have drying.
• Pots & Pans (P4)
Cleans heavily soiled cookware. No more hand
scrubbing frying pans and pots.
• Casseroles (P5)
Cleans greasy and heavily soiled dishes.
Casseroles come out clean.
• Glassware (P6)
Safely washes delicate glassware, leaving it
sparkling.
• Night Care (P7)
Quietly washes dishes overnight. Sleep soundly
knowing dishes will be clean in the morning.
Options and Extra Functions
Select the desired cycle and then select the options
for that cycle.
Steam
This option adds steam at the start of the cycle to
improve wash performance.
If the Steam option is added to a cycle, the
Sanitized indicator stays lit at the end of the cycle
if the dishes were properly sanitized (except the
Refresh cycle). If the dishwasher could not
properly sanitize the dishes because the Steam
option was not selected, the cycle was interrupted
or the water could not be heated to the required
temperature, the indicator will not light up at the
end of the cycle. Open and close the door or press
POWER to turn the indicator off.
• This high temperature rinse sanitizes dishes and
glassware in accordance with the NSF/ANSI
Standard 184 for residential dishwashers.
Certified residential dishwashers are not
intended for use in licensed food
establishments. Only sanitizing cycles have been
designed to meet the requirements for soil
removal and sanitization efficacy. There is no
intention, either directly or indirectly, that all
cycles on a certified machine have passed the
sanitization performance test.
Using the Flexible Zone
This option adjusts the wash intensity to target
different zones inside the dishwasher. Set it to
wash just the upper rack or lower rack, or set the
intensity to soft for the upper spray arm and
strong for the lower spray arm.
The Flex Zone is off by default. Press the Flex
Zone button to customize settings.
•Press the Flex Zone button repeatedly to select
one of the three modes.
Mode Description
Various conditions
• Place heavily soiled dishes like
plates and bowls in the lower rack
and lightly soiled dishes like cups
and small plates in the upper rack to
get the best results.
us_main.book.book Page 27 Wednesday, June 29, 2022 8:57 AM
To Next Page
General
