27
TURNING ON THE TV
WATCHING TV / CHANNEL CONTROL
First, connect the power cord correctly.
Turn on the power by pressing the power button on the product.
Press the TV/PC button on the remote control.
Set the channel by using the CH + / - buttons or number but-
tons on the remote control.
2
1
Se
tup Menu
Note:
a. It will automatically disappear after approx. 40 seconds
unless a button is pressed.
b. Press the
RREETTUURRNN
button to change current OSD into
regular OSD.
If the OSD (On Screen Display) is displayed on the screen
as figure after turning on the set, you can adjust the
Language, Country, Time Zone, Auto channel tuning.
4
3
Installing Batteries
■
Open the battery compartment cover on the back and install the batteries
matching correct polarity
(
+ with +, - with -
)
.
■
Install two 1.5 V AAA batteries. Don’t mix old or used batteries with new ones.
■
Close cover.
■
To remove the batteries, perform the installation actions in reverse.
To Next Page
Need help?
General
Weight and Dimensions
