12
Troubleshooting
No power.
No sound.
The unit does not start playback.
Radio stations cannot be tuned in.
Unable to record.
The remote control does not work
properly.
The power cord is not plugged in.
Check whether electricity failed.
Check whether you select right func-
tion.
An unplayable disc is inserted.
The disc is dirty.
The antenna is positioned or
connected poorly.
Record protect tabs are removed.
The remote control is too far from the
unit.
There is an obstacle in the path of the
remote control and the unit.
The battery in the remote control is
exhausted.
Plug in the power cord.
Check the condition by operating other
electronic devices.
Press FUNCTION or INPUT and check
the selected function.
Insert a playable disc.
Clean the disc.
Connect the antenna securely.
Cover holes on back edge of tape with
tap.
Operate the remote control within
about 23 ft (7 m).
Remove the obstacle.
Replace the battery with new one.
Symptom Cause Correction
General
CD
RADIO
TAPE
Remote control
Designs and specifications are subject to change without notice.
To Next Page
Loading...
Need help?
General
