To Next Page

To Previous Page

Installation Manual 47

Function

ENGLISH

If you set the Dip Switch when power is on, the change in setting is not applicable. The changing set-

ting is enabled only when Power is reset.

Dip Switch

Function

1234

Normal Operation (No Function)

Forced Cooling Operation

Wiring Error Check

Saving Power Consumption (Step 1)

Saving Power Consumption (Step 2)

Mode Lock (Cooling)

Mode Lock (Heating)

Night Quiet Mode (Step 1)

Night Quiet Mode (Step 2)

Mode Lock (Cooling) + Night Quiet Mode (Step 1)

Mode Lock (Cooling) + Night Quiet Mode (Step 2)

Mode Lock (Cooling) + Saving Power Consumption (Step 1)

Mode Lock (Cooling) + Saving Power Consumption (Step 2)

Mode Lock (Heating) + Saving Power Consumption (Step 1)

Mode Lock (Heating) + Saving Power Consumption (Step 2)

Function

Dip S/W Setting

WARNING: When you set the dip switch, you should turn off the circuit

breaker or shut the power source of the product down.

CAUTION

• Unless the applicable dip switch is set properly, the product may not

work.

• If you want to set a specific function, request that the installer sets the

dip switch appropriately during installation.

LG MULTI F MAX User Manual

Other manuals for LG MULTI F MAX