18
Operating
3
Listening to music stored on
the Bluetooth devices
Pairing your unit and Bluetooth
device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using
h
on
the remote control or F on the unit until the
function is selected.
Bluetooth LED will blink.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG SOUND BAR
(XX:XX)”.
y
Depending on the Bluetooth device
type, some device have a dierent
pairing way. Enter the PIN code (0000) as
needed.
,
Note
3. When this unit is successfully connected with
your Bluetooth device, Bluetooth LED Will be
turned on for few second and turned off.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
y
When using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
-
There is a obstacle between the unit and
the bluetooth device.
-
There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
y
This unit supports Bluetooth auto pairing.
However it does not operate in the case
below :
-
When you restart this unit.
-
After using LG TV function, auto pairing
does not operate.
y
The sound may be interrupted when
the connection interfered by the other
electronic wave.
y
You cannot control the Bluetooth device
with this unit.
y
Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
y
Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y
You can enjoy wireless system using phone,
MP3, Notebook, etc..
y
The more distance between the unit and
the bluetooth device, the lower the sound
quality becomes.
y
Bluetooth connection will be disconnected
when the unit is turned o or the bluetooth
device gets far from the unit.
y
When Bluetooth connection is
disconnected, connect the bluetooth device
to the unit again.
,
Note
y
XX:XX means the last four digits of BT
address. For example, if your unit has a
BT address such as 9C:02:98:4A:F7:08,
you will see “LG SOUND BAR (F7:08)” on
your Bluetooth device.
To Next Page
Loading...
Need help?
General
