LG NB3530A User Manual

Getting Started 11
Getting Started
1
Setting up
Pairing wireless subwoofer
LED indicator of wireless subwoofer
LED Colour Status
Yellow The wireless subwoofer is
receiving the signal of the unit.
Yellow (blink) The wireless subwoofer is trying
to connect.
Red The Wireless subwoofer is in
standby mode.
O (No
display)
The power cord of wireless
subwoofer is disconnected.
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the Wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
Manually pairing wireless subwoofer
When the connection failed, you can see the red
LED on the subwoofer and cannot get sound from
the subwoofer. To solve this problem, follow the
steps below.
1. Press and hold
I
on the unit and MUTE
on
the remote control simultaneously.
- “REMATE” appears on the display window.
2. Press PAIRING on back of the woofer.
- The Yellow LED will flicker.
3. Turn off and on the unit.
- If you see the yellow LED, it’ s successful.
4. If you don’t see the yellow LED, try again Step 1
- Step 3.
y
If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
y
Set the distance between this unit and
wireless subwoofer within 10 m (32 ft.).
y
Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
y
It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
,
Note
NB3531A-NB_DHKGLLK_ENG_2485.indd 11 2013-10-30  11:02:26

LG NB3530A Specifications

General

RMS Power	300 watts
Inputs	rca
Outputs	none
HDMI Inputs	1
HDMI Outputs	1
USB Ports	0
Bluetooth	yes
Wireless Subwoofer Connectivity	yes
Optical Audio Inputs	2
Remote Control	yes

Weight and Dimensions

Depth	2 inches
Height	2.8 inches
Width	37.5 inches
Net Weight	17.7 pounds