11
Operating
2
Basic Operations
Switch to Power On
Press
1/
F. The LED indicators light up and the last
function you selected blinks, then the unit switches
to Power on.
Switch to Standby mode
Press and hold
1/
F. The LED indicators light on
and then o, and the unit switches to Stand by.
Android Device Operation
You can enjoy the sound from your LG Android
device through the dock for Android device of this
unit. For details about Android device, refer to the
Android device User Guide.
To stream audio from your Android device through
this unit, you need :
y
With Android operation system : Ver 4.1(or later)
y
With a micro USB connector
With Android operation system (Version 4.0 or
below), this unit can only charge it and you can
enjoy audio through Bluetooth.
y
This unit may not compatible with the
device that does not support the *AOA
(Android Open Accessory) 2.0 version.
It is possible that certain devices may not
support or be compliant with the AOA2.0
USB audio standard, resulting in the device
freezing or rebooting after being connected
and detached from the speaker system.
If you experience this problem, please
contact your device manufacturer. Your
device may need to be updated with the
latest Jellybean software and or the correct
AOA2.0 USB audio standard.
*About AOA (Android Open Accessory) 2.0
version ;
Audio output from Android device to the
Accessory and HID (Human Interface Device)
y
You are recommended to remove the case
for your Android device(Ver 4.1or later)
before you dock your Android device.
,
Note
1. Check the orientation of the micro USB
connector on your Android device.
2. You can rotate Android device Dock.
If you want to rotate the dock, pull the dock
upwards and then rotate it to the right or left .
To Next Page
Loading...
Need help?
General
