To Next Page

To Previous Page

Pairing the Magic Remote

You must pair the Magic Remote with the LG webOS TV to use it.

Pair the Magic Remote prior to use as follows:

If the Magic Remote failed to register, turn the TV off and back on, and then try to register

again.

Re-registering the Magic Remote

If the Magic Remote’s pointer does not appear on the TV, you must re-register it.

Unregistering Magic Remote

If you have multiple LG Smart TVs and want to register the Magic Remote currently in

use to another TV, you must unregister the previous one.

Using the Magic Remote

Using the Remote Control Button

Briefly press or press and hold remote control button to access various functions.

Turn on the TV. After about 20 seconds, point the remote toward the TV and then

press the Wheel (OK).

The remote control will be registered automatically, and the pairing completion

message is displayed on the TV screen.

Hold the remote control towards the TV and press the

and buttons at the same

time for more than 5 seconds until instructions appear.

The previously registered remote control is deregistered and then registered again.02

If you press the

button and the button at the same time for more than 5

seconds, the lamp on Magic Remote will blink and the registration will be canceled.

If you want to unregister and register for another LG Smart TV, please follow the

registration method above.

•

LG OLED55A2PUA User Manual

Other manuals for LG OLED55A2PUA