LG OLED65G3PSA User Manual

10
Specications
Product specifications may be changed without prior notice due to upgrade of product functions.
Power requirement AC 100 - 240V~ 50/60Hz
(Depending upon country)
Broadcasting Specifications
Television system
Digital Analog Digital Analog Digital Analog
SBTVD (ISDBT) NTSC/PAL-N/PAL-M DVB-T/T2 NTSC/PAL-N/PAL-M ATSC, 64 & 256 QAM NTSC-M
Channel
coverage (Band)
VHF 2-13
UHF 14-69
DTV 2-69
CATV 1-135
VHF 2-13
UHF 14-69
DTV 2-69
CATV 1-125
VHF 2-13,
UHF 14-69,
DTV 2-69,
CATV 1-135,
CADTV 1-135
External antenna
impedance
75 Ω
• Certain 8K input/decoding standards may not be supported. An additional device may be necessary to support certain 8K standards. Upscaled and enhanced
8K images will vary depending upon the source content. (Depending upon model)
Environment Condition
Operating Temperature 0°C to 40°C Storage Temperature -20°C to 60°C
Operating Humidity Less than 80% Storage Humidity Less than 85%
Conditions for Wall Mount Installation
Tilt Angle 0° - 15°
* This specification range applies to TV wall mounts when adjusting for proper viewing angle.
• The energy information provided on the product is shown in accordance with the applicable regulations of each respective country. (Depending upon the
country)
- The Energy consumption was measured in accordance with IEC 62087.
• The actual energy consumption depends on the usage environment. (Example: content watched, TV settings, etc.)
• For information of the power supply and power consumption, refer to the label attached to the product.
- The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.
* On some models, the label is inside the external device connection terminal cover.
* Depending upon the model or country, the typical power consumption may not be on label.

LG OLED65G3PSA Specifications

General

Brand	LG
Model	OLED65G3PSA
Category	OLED TV
Language	English