To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why does my LG Pro Centric 32LP645H TV have a picture but no sound?
If your LG TV has a normal picture but poor or no sound, consider the following: * Check if the audio is muted. Press the MUTE button or use the Volume Up key to increase the sound level. * There may be a broadcast problem. Try tuning to a different channel to see if the sound improves.
How to fix an LG Pro Centric 32LP645H TV remote that is not working?
If your LG TV remote is not working, try these steps: 1. Ensure the remote is in TV Mode by pressing the MODE key to select 'TV'. 2. Point the remote directly at the IR receiver on the TV. 3. Move closer to the TV, or dim the room if there's too much light. 4. If applicable, ensure the MPI cable is connected to the MPI device. 5. Remove any obstructions blocking the path to the TV’s receiver. 6. Replace the batteries. 7. Check the battery polarity to ensure the '+' and '-' match in the battery compartment. 8. Dim the room light, as too much light can interfere with the remote's signal.
What to do if there is no picture on my LG Pro Centric 32LP645H TV?
If your LG TV shows no picture, here are a few things to check: * Ensure the TV is turned ON. * Verify the antenna or cable is properly connected to the TV. * Check all connections to the TV to make sure they are correct. * If applicable, ensure the MPI cable is connected to the MPI device. * The program might be encrypted, so try another channel. * The tuning band might be wrong, in which case you should adjust the Installer Menu settings.
Why can't I directly enter a channel number on my LG Pro Centric 32LP645H TV?
If you cannot directly enter a channel number on your LG TV, it could be due to one of the following reasons: * If the TV is in Pass-through Mode, the Installer Menu item 028 CH. OVERIDE may be set to 0 (disabled). To allow direct keypad entry, set CH. OVERIDE to 1. * If the TV is in FTG Mode, the channel you entered may not be part of the FTG Channel Map. In this case, make changes to the FTG Channel Map using the FTG File Manager or the FTG Device Configuration Application.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LED |
| Resolution | 1366 x 768 |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Built-in Wi-Fi | Yes |
| Pro:Centric | Yes |
| HDTV Compatibility | Yes |
| Operating System | Pro:Centric |
| Weight | 4.9 kg |
Highlights key setup sections like EZ-Manager Wizard, Custom Master TV Setup, and FTG Mode.
Covers essential safety precautions for apparatus usage and installation.
Details on grounding, cleaning, ventilation, and product care.
Covers initial setup, pass-through, FTG mode, EZ-Manager, and Custom Master TV setup.
Explains accessing the Installer Menu and the TV cloning process.
Details FTG mode operation and remote management capabilities.
Describes interactive features and navigation for Pro:Centric TV.
Explains methods for configuring Pro:Centric settings on the TV.
Introduction to the wizard and preparatory steps before configuration.
Guides on starting, exiting, or disabling the EZ-Manager Wizard.
Presents options for TV configuration within the wizard.
Details on assigning zone, label, and room number for TV identification.
Steps for automated Pro:Centric setup and server search.
Procedure for manual configuration of Pro:Centric settings.
Guides for using USB devices for TV configuration and software upgrades.
Instructions for using the LG Smart Install utility for TV configuration.
Steps to access and navigate the TV's installer menu.
Details on navigating, changing settings, and exiting the Installer Menu.
Provides detailed explanations for specific Installer Menu items.
Outlines cloning requirements, methods, and features.
Step-by-step guide to creating a master TV setup for cloning.
Instructions for customizing channel icons and text labels.
Key information and prerequisites for successful TV cloning.
Process for learning TV setup from a master using a USB .tlx file.
Process for teaching master setup to a target TV using a USB .tlx file.
Process for learning TV setup from a master using a USB .tll file.
Process for teaching master setup to a target TV using a USB .tll file.
Steps to learn master TV setup using a TLL-1100A clone programmer.
Steps to teach master TV setup using a TLL-1100A clone programmer.
Steps to learn master TV setup using an LT2002 clone programmer.
Steps to teach master TV setup using an LT2002 clone programmer.
Explains the two methods for FTG mode configuration: CPU and EBL.
How to identify the TV's current operating mode (FTG or Pass-through).
Guide to creating FTG configuration files using FTG File Manager software.
Process for transferring FTG configuration files to a TV via USB.
Method to save existing TV configuration settings to a USB device.
Manual steps for TV setup and channel tuning if RF channels are unknown.
Overview of the main interface for managing FTG configuration files.
Utility for creating, viewing, editing, and printing logical channel maps.
Tool for editing logical channel data, custom labels, and attributes.
Utility for configuring Installer Menu settings within FTG files.
Details on connecting external devices and setting up the Remote Jack Pack.
Steps to update TV or PTC software via a USB memory device.
Procedure for downloading custom splash screen images to the TV.
Tables showing power consumption in Watts and percent savings for various backlight levels.
Defines the priority order for auto-sensing different video and audio input sources.
Methods for restoring TVs to factory default settings, including Pass-through mode.
Enables localized configurations for TVs by assigning Zone designations.
How to apply zone assignments during cloning and set TV Zone #.
Details and connections for rear and side panel ports on the LP645H TV.
Explains the functions of various keys on the LG Installer Remote.
Common issues and solutions for installation, picture, sound, and remote problems.
Troubleshooting specific issues related to Commercial Mode and FTG operation.
Solutions for problems encountered with clone programmers and cloning.
Records changes made to the document over time.
Information regarding open source licenses used in the product.
