13
EN
Reversing the door
You can reverse the door for your convenience.
WARNING
• Do not reverse the door while the appliance is
stacked on a washing machine.
• Before removing the hinge screws, have an
assistant support the weight of the door. The
door could fall on the floor due to the weight of
the door.
• For safety reasons, two or more people need to
work together to reverse the door.
NOTE
• The appearance of the screws varies and the
screws must be inserted differently depending
on the position. Make sure the screw is
properly selected before tightening.
1
Open the door and remove 2 screws on the
door hinge. After removing the screws, put the
door down carefully with the front side facing
down to the floor.
Door hinge
Cabinet
WARNING
• Remove the lower screw first. The door may
fall on to the floor due to its weight and the door
can be damaged.
2
Remove 8 screws on the hinge assembly from
the door.
• There are 6 screws on the front and 2
screws on the side.
Hinge
assembly
3
Remove the 3 screws from the door latch
assembly which is fixed between the door
and the hinge assembly, and then remove the
screw which is fixed on the door hook.
Door latch
assembly
4
Switch between the position the hinge
assembly and door latch assembly and then
tighten the screws in reverse order.
• Tighten the screw in proper position
referring from 2 to 4 steps.
Hinge
Assembly
Door latch
assembly
To Next Page
Loading...
Need help?
General
Weight and Dimensions
