LG SP2 User Manual

11
Connecting to the TV
Enjoy a rich, high-quality sound by connecting the product to a TV or a beam projector. It has been designed to
enhance the realism of your favorite programming, such as dramas and sports broadcasts.
Connecting with an Optical Cable
Transmit your TV’s audio to the product by connecting it to the TV with an optical cable. You can add a variety of
3D effects to the original audio to ll the room with a deep, rich sound.
Watching TV after connecting with an optical cable
a If the digital cable terminal has a cover, rst remove the covers from both ends.
b Using an optical cable, connect the OPTICAL IN terminal on the back of the product to the Optical Digital
Output (OPTICAL OUT) terminal on the TV as shown in the picture.
OPTICAL
IN
Connecting to the TV

LG SP2 Specifications

General

Audio decoders	Dolby Digital
RMS rated power	100 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Subwoofer location	Built-in
Subwoofer sensitivity	80 dB
Number of speakers	2
Soundbar speaker RMS power	70 W
Wi-Fi	No
HDMI version	1.4
Bluetooth version	4.0
Connectivity technology	Wired & Wireless
Digital audio optical out	1
Color name	Dark Gray
Product color	Gray
TV stand usage	-
Audio formats supported	AAC, AAC+, FLAC, LPCM, MP3, OGG, WAV, WMA
Consumer Electronics Control (CEC)	SimpLink
Package type	Box
Package depth	140 mm
Package width	833 mm
Package height	141 mm
Package weight	3100 g

Weight and Dimensions

Depth	90 mm
Width	760 mm
Height	63 mm
Soundbar weight	2300 g