LG SPN11M-SL User Manual

Connecting 23
Connecting
2
y
It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
y
The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer as
close as possible and avoid the cases below.
- There is an obstacle between the main unit
and the subwoofer.
- There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
- Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m to prevent
wireless interference.
!
1 m
,
Note
Wireless rear speakers
connection
LED indicator of wireless rear speakers
LED Color Status
Green
(Blink)
The connection is trying.
Green
The connection is completed.
Red The wireless rear speakers are in
standby mode or the connection
is failed.
Off
(No display)
The power cord of wireless rear
speakers are disconnected.
Setting up the wireless rear speakers
for the first time
1. Connect the power cord of the wireless rear
speakers to the outlet.
2. Turn on the main unit: The sound bar and wireless
rear speakers will be automatically connected.
- The green LED on the wireless rear speakers
turns on.

LG SPN11M-SL Specifications

General

Brand	LG
Model	SPN11M-SL
Category	Speaker System
Language	English