LG TA106 User Manual

Operating14
Operating
3
Radio Operations
Be sure that FM aerial is connected.
(Refer to the page 12)
Listening to the radio
1. Press FUNCTION until FM appears in the display
window.
The last received station is tuned in.
2. Press and hold TUNING -/+ for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press TUNING -/+ repeatedly.
3. Adjust the volume by rotating VOLUME +/-
on the unit or by pressing VOLUME +/- on the
remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION until FM appears in the display
window.
2. Select the desired frequency by pressing
TUNING -/+.
3. Press PROG./MEMO. a preset number will  ash
in the display window.
4. Press PRESET/FOLDER
W/S
to select the
preset number you want.
5. Press PROG./MEMO. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET/FOLDER
W/S
.
Deleting all the saved stations
1. Press and hold PROG./MEMO. for two seconds.
“ERASE ALL” will  ash up on the unit display.
2. Press PROG./MEMO. to erase all saved radio
stations.
Improving poor FM reception
Press
d
/
M
on the unit or
d
/
M
on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press SET/RDS
repeatedly to cycle through the various data
types. :
PS
(Programme
Service Name)
The name of the channel will
appear in the display.
PTY
(Programme
Type
Recognition)
The programme type (e.g. Jazz
or News) will appear in the
display.
RT
(Radio Text)
A text message contains special
information from the broadcast
station. This text may scroll
across the display.
CT
(Time
controlled by
the channel)
This shows the time and date as
broadcast by the station.
You can search the radio stations by programme
type by pressing SET/RDS. The display will show
the last PTY in use. Press PTY one or more times to
select your preferred programme type. Press and
hold
C
/
V
. The tuner will search automatically.
When a station is found the search will stop.
TA106-D0P-AHUNLL-ENG.indd 14TA106-D0P-AHUNLL-ENG.indd 14 11. 10. 04  5:3111. 10. 04  5:31

LG TA106 Specifications

General

Brand	LG
Model	TA106
Category	Stereo System
Language	English