TBOUBtESHOOTING
BEFORE CALLING FOR SERVICE (cont.)
Water drips from * This is normal. ° This is steam condensation. The dripping water
nozzle when Steam will stop after a short time.
Cycle starts.
Steam doesn't * Water level error. ° Unplug dryer and call for service.
generate but no error
code is shown.
Garments still ° Too many or too different ° Small loads of 1 to 5 items work best.
wrinkled after types of garments in dryer. ° Load fewer garments. Load similar-type garments.
STEAM FRESH".
There are no creases ° The function of this cycle * Use an iron to make creases.
left on garment after is to remove wrinkles from
STEAM FRESH". fabric.
Garments have ° This is normal. * Depends on individual moisture level in skin.
static after REDUCE
STATIC.
Garments are too ° Correct drying options not * Select load weight manually before starting
damp or too dry after selected. REDUCE STATIC option.
REDUCE STATIC.
Garments are not ° This is normal. * Depends on the amount or type of garments.
uniformly damp after
EASY IRON.
Water drips from ° This is normal. * This is steam condensation on door surface.
door during EASY
IRON.
Steam is not visible • This is normal. ° Steam vapor is difficult to see when the door is
during Steam Cycle. closed.
The drum does not ° This is normal. * The drum is turned off so that the steam vapor
turn during Steam remains in the drum.
Cycle.
Cannot see steam ° This is normal. ° Steam is released at different stages of the cycle
vapor at the for each option.
beginning of cycle.
The display shows ° MORE TIME button pressed. * Pressing the MORE TIME button several times will
_; _R set the cycle for a big load such as a comforter.
Top plate of the dryer * This is normal. ° The top plate of the dryer will get warm during
is very warm. steam functions.
Odors remain in ° STEAM FRESH TMdid not ° Fabrics containing strong odors should be
clothing after remove odor completely, washed in a normal cycle.
STEAM FRESH TM.
$7
To Next Page
Loading...
Need help?
General
