142
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
I/II
■ Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clar-
ity of sound is improved.
■ Language selection for dual language broadcast (Except for Singapore, New Zealand and
Indonesia)
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL
II or DUAL I+II.
DUAL I Sends the primary broadcast language to the loudspeakers.
DUAL II Sends the secondary broadcast language to the loudspeakers.
DUAL I+II Sends a separate language to each loudspeaker.
STEREO/DUAL RECEPTION (IN ANALOGUE MODE ONLY)
When a programme is selected, the sound information for the station appears with the programme
number and station name.
Broadcast On Screen Display
Mono
MONO
Stereo
STEREO
Dual (Except for Singapore, New Zealand and
Indonesia)
DUAL I, DUAL II, DUAL I+II (Except for Singapore, New Zealand
and Indonesia)
NICAM (Only Singapore, New Zealand and Indonesia) NICAM (Only Singapore, New Zealand and Indonesia)
1
Select Audio or Audio Language.
2
Select the sound output.
To Next Page
Loading...
Need help?
General
