CONNECTING WITH AN HDMI CABLE
1
NOTE
► The TV can receive video and audio signals simultaneously when
using an HDMI cable.
► If the DVD does not support Auto HDMI, you must set the output reso-
lution appropriately.
► Check that your HDMI cable is High Speed HDMI Cable. If the HDMI
cables are not High Speed HDMI Cable, flickering or no screen dis-
play can result. Please use the High Speed HDMI Cable.
► The TV set can process audio format of PCM or Dolby Digital, when
connect the external equipment using an HDMI cable.
1
Connect the HDMI output of the external equipment (digital set-
top box, DVD, etc.) to HDMI/DVI IN 1, HDMI/DVI IN 2(Except
for 22LD3**), HDMI IN 3(Except for 22/26/32LD3**,
32/37/42/47LD4**, 22LE5***) or HDMI IN 4 (Only
32/37/42/47/55/60LE5***, 32/37/42/47/55LE7***,
42/47/55LE8***, 42/47/55LX6***, 47/55LX9***,
32/42/47/55LE4***) jack on the TV.
2
Turn on the external equipment.
(Refer to the external equipment's manual for operating
instructions.)
3
Select HDMI1, HDMI2(Except for 22LD3**), HDMI3(Except for
22/26/32LD3**, 32/37/42/47LD4**, 22LE5***) or HDMI4 (Only
32/37/42/47/55/60LE5***, 32/37/42/47/55LE7***,
42/47/55LE8***, 42/47/55LX6***, 47/55LX9***,
32/42/47/55LE4***) input source using the INPUT button on the
remote control.