23
EXTERNAL EQUIPMENT SETUP
If your access point or wireless router that supports PIN or WPS(Wi-Fi Protected Setup), it’s available
to use your access point or wireless router within 120 counts. You do not need to know the access
point name (SSID: Service Set Identifier) and security code of your access point or wireless router.
WPS (Wi-Fi Protected Setup)
Simple setting (WPS-button mode)
Press PBC mode button of AP and press ‘Connect’ button.
Connect
Caution: Check if PBC mode button is available for your AP.
ꔉ Next
1
Repeat step 1-4 on P.21.
2
Select Simple setting (WPS-button mode).
3
Select Connect.
Select the wireless network setting type.
Select the wireless network setting type.
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
ꔉ Next
Exit
Previous
Exit
Previous
4
Repeat step 4-5 on P.17.
To Next Page
Loading...
Need help?
General
