EasyManuals Logo

LG UQ8000 User Manual

LG UQ8000
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.
For more information of screws and wall mount bracket, refer to the
Separate purchase.
If you intend to mount the product to a wall, attach VESA standard
mounting interface (optional parts) to the back of the product. When
you install the set to use the wall mounting bracket (optional parts), fix
it carefully so as not to drop.
When mounting a TV on the wall, make sure not to install the TV by
hanging the power and signal cables on the back of the TV.
Do not install this product on a wall if it could be exposed to oil or oil
mist. This may damage the product and cause it to fall.
When installing the wall mounting bracket, it is recommended to cover
the stand hole using tape, in order to prevent the influx of dust and
insects. (Depending on model)
Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75Ω).
Use a signal splitter to use more than 2 TVs.
If the image quality is poor, install a signal amplifier properly to improve
the image quality.
If the image quality is poor with an antenna connected, try to realign the
antenna in the correct direction.
An antenna cable and converter are not supplied.
For a location that is not supported with Ultra HD broadcasting, this TV
cannot receive Ultra HD broadcasts directly.
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable
(75Ω). (Depending on model)
Starting TV
Turning on the TV
You can simply operate the TV functions, using the button.
Power On (Press)
Power Off
1)
(Press and Hold)
Menu Control (Press
2)
)
Menu Selection (Press and Hold
3)
)
1) All running apps will close, and any recording in progress will stop.
(Depending on country)
2) You can access and adjust the menu by pressing the button when TV is on.
3) You can use the function when you access menu control.
Note
If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
Your TV’s OSD (On Screen Display) may differ slightly from that shown
in this manual.
The device must be easily accessed to a location outlet near the access.
Some devices are not made by turning on / off button, turning off the
device and unplugging the power cord.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG UQ8000 and is the answer not in the manual?

LG UQ8000 Specifications

General IconGeneral
Display TypeLED
HDRHDR10, HLG
Smart TV PlatformwebOS
Processorα5 Gen5 AI Processor 4K
HDMI Ports3
USB Ports2
Refresh Rate60Hz
HDMIHDMI 2.0
Sound Output20W
Voice AssistantsGoogle Assistant, Amazon Alexa
Resolution3840 x 2160
Screen Sizes43", 50", 55", 65", 75", 86"
Wi-Fi802.11ac
BluetoothBluetooth 5.0

Related product manuals