USNG YOUR WASHING MACHINE 27
_ TM
Saving energy, ColdWash
Adding the Coldwash TM option reduces energy usage and
provides the same washing performance as a warm water
wash
By using 6 different washing motion (Tumbling, Rolling,
Stepping, Scrubbing, Swing, Filtration), fabrics get the cleaning
benefits, without the energy usage
1 Press J_)_ and turn _)} to the desired cycle.
2 Press _'_ • The washer will automatically adjust the cycle
settings
3 Set any other desired options.
4 Pres _ J!_li_
U@NOTE .......
• When you select the COLDWASH TM option, wash time
will be increased up to 10 minutes
, • For high wash efficiency, it is recommended to use less
i than 8 pounds
L J
Turn on!off melody and button tones,
Sig_"}al On/lOft
The washing machine plays a melody when the wash cycle
isfinished.The buttons make a sound each thrlea button is
pressed. The melody and button tones can be turned on and
offas desired.
Press and hold i_s ,,_: i for 3 seconds dunng the wash
cycle
- Once signal OFF is set, the signal beeps once
(When the-end-of-cycle signal is disabled)
Press and hold for 3 seconds during the wash
cycle
- Once signal ON is set, the beeper beeps once.
Setting options during cycle
You can add the desired options during the wash cycle
Button lock feature, Child Lock
You can lock the washing machine to prevent children or
others from changing the cycle settings by pressing the
buttons during the cycle.
__ seconds during the wash cycle.Press and hold _ o ,_:w0_ for 3
- When the Child Lock isenabled, a L-Lmessage and the
remaining wash time are displayed,in turn,on the display
panel of the washing machine
(When the Child Lock is activated.)
Press and hold for 3 seconds during the wash cycle.
_@ NOTE
• CHILD LOCK lasts after the end of cycle If you want to
deactivate this function, Press and hold the PREWASH
button for 3 seconds.
Detecting weight of load, LOAD SIZE
Loading the washing machine and pressing the start button
triggers the machine to detect the weight of the load, and
displays the load size icon _ on the display panel for 10
L%_
seconds If the load size icon L_ is not on, you can check
the weight of the load again d_ring the cycle This feature
will help you set the detergent amount so as to wash clothes
efficiently based on the detected load size.
-@ NOTE
• If the washer has detected a small load size, the display
may only show one lighted bar Only a small amount
of detergent should be used, because the amount of
clothing and the quantity of water that will be used is
small.
Detergent
-- manufacturer's
co_ amou,,tf_,I--- _J recommended
hs Dad_-,-,_ ];- _1 ..... flora
L._.j' uI}oad
The load detection routine only works with dry clothes.
Since the detection system is detecting the WEIGHT of
the load, it will be affected by unusually heavy articles
in the load. For example, a garment that is already wet
that is loaded with other items will cause the LOAD
SIZE reading to be inaccurate.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
