MA NTENANCE 31
Cleaning fhe wafer inlef fillers
Clean the water inlet filters periodically to prevent clogging.
Take extra care to clean the water inlet filters for areas using
hard water Water may not be supplied if there are foreign
objects, such as rust, sand, or stones in the water inlet filters.
1 Press \_O) to turn off the washing machine and pull out the
plug.
2 Turn off the faucets connected with the water inlets
3 Remove the water inlets
Pull out the water inlet filter.
cA WARNING
• Unplug the power cord and turn off the faucets before
cleaning. Failure to do so may cause electric shock.
De not use the washing machine without the inlet filters.
If you use the washing machine without the inlet filters it
will cause leaks and malfunction
• If you use the washing machine in an area with hard
water, the inlet filter may clog due to lime buildup.
Contact your nearest LG customer service center if the
inlet filter is not clean or is missing.
. J
:-@ NOTE
* _ _ message will blink on the display when the water
pressure n the detergent drawer s weak or an n et f ter
6
7
Remove foreign objects from the water filter inlet.
- Soak the water filter inlets in white vinegar or a lime scale
remover or use a toothbrush to remove foreign objects
and rinse thoroughly
Press the water filter inlets back into place.
Reattach the water lines to the washing machine.