UB CLEAN
T
21
Additional Function Program
If scrud is allowed to build-up in the machine it can result in stains on your clothes or give an
unpleasant smell in your washer.
Scrud is the waxy build-up that can occur within any washer when the fabric softener comes into
contact with Detergent in conjunction with excessive soap usage and cold water. The Tub Clean
function can help prevent scrud build up. by cleansing the inner and outer bowl.
Press the POWER (AUTO OFF) button to turn power on.
Press the PROGRAM button to select the TUB CLEAN program.
When the machine has stopped filling, Add 300ml of oxygenated bleach or a
descaling product.
Press the START/PAUSE button.
1
3
4
5
2
NOTE
NOTE
• Before using this program remove lint inside lint filter.
• When using this program, do not place any laundry inside tub.
• After using this program, remove dirt inside filter.
• After finishing this program, open the lid of the washer to help remove any irritating odor.
• Do not pour bleach directly into the tub. It might cause damage to the tub.
• Do not leave diluted oxygenated bleach inside tub for a long time as this may cause the tub to rust
and corrode.
• The remaining diluted oxygenated bleach water must be drained out.
• Use this program once every month.
• Do not use this program repeatedly each time.
• When the lid is open the machine will not operate, and
chime sound will remind you to close the lid.
• The display will show the time remaining.
• Do not use Detergent or softener.
• Do not place any laundry inside tub.
• Do not use the Detergent box.
•
Powdered detergent is recommended when using the delayed start function.
Close the lid.
To Next Page
Loading...
Need help?
General
