LG WT1201CV User Manual

12
INSTALLATION INSTRUCTIONS
Checking and choosing the proper
location
Install the washing machine on a solid floor that is strong and
rigid enough to support the weight of the washing machine,
even when fully loaded, without flexing or bouncing. If the
floor has too much flex, you may need to reinforce it to make
it more rigid. If the floor is not solid, it may cause severe
vibration and noise.
1
Clean the floor before installation.
- Make sure to select solid and smooth ground.
2
Two or more people are needed for moving and
unpacking the washing machine.
3
Allow for sufficient space between the walls and the
washing machine for installation.
Space requirements
You must allow sufficient space for water lines, the drain
line, and airflow.
NOTE
Be sure to allow for wall, door, or floor moldings that
y
may increase the required clearances.
Installing on a floor
26.8″
(68.0 cm)
4.7″
(12.0 cm)
54.33″
(138.0 cm)
(with lid
open)
27″
(69.6 cm)
0.8″
(2.0 cm)
0.8″
(2.0 cm)
40.16″
(102.0 cm)
NOTE
Before installing the washer, make sure the floor is
y
clean, dry and free of dust, dirt, water and oils so the
washer feet cannot slide easily. Leveling feet that can
move or slide on the floor can contribute to excess
vibration and noise due to poor contact with the floor.

LG WT1201CV Specifications

General

Door hinge	Up
Motor type	Beltless
Display type	LED
Loading type	Top-load
Product color	Stainless steel
Built-in display	Yes
Appliance placement	Freestanding
Dispenser tray type	3-way
Drum capacity	- kg
Delay start (max)	19 h
Spin-drying class	-
Maximum spin speed	1100 RPM
Noise level (wash)	- dB
Number of washing programs	8
Current	5 A
AC input voltage	120 V
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Sustainability certificates	ENERGY STAR
Package depth	796 mm
Package width	749 mm
Package height	1110 mm
Package weight	68855 g

Weight and Dimensions

Depth	721 mm
Width	685.8 mm
Height	1020 mm
Weight	60872 g