HOW TO USE 17
HOW TO USE
CONTROL PANEL FEATURES
B C
_ _ STEAM0_CLE i
Stea_P' Perm.Press/Casual
Cotton/Normal_-'-_, _
,eovyoo,yJ_21--'_%_ Towo,_
ou,,y,oo,o,oof//./\..\\\s,,o,.__eo,-_
'_"°'w't"ltl-t _-/tt"°_c_°°'°tllli!)
'°''" M\ZX J_lYi"' w.,.
c+_,,,e.0,eno"_-__./\Jj_ Wee,
g7_';_.-TubClean__L Delicates
F E
s
_1"Press & Hold 3_ec. for Extra Funl
Medtum Normal Spin 0nly
A
Et
POWER (ON/OFF) BUTTON
Press to turn the washer ON. Press
again to turn the washer OFF. Pressing
the POWER button during a cycle will
cancel that cycle and any load settings
will be lost. The lid will unlock after a
brief pause.
NOTE: If there is any water remaining
in the tub after the washer shuts off, it
will drain following a five minute delay.
The washer can be restarted any time
before the drain begins. However, once
the water begins to drain, all functions
will be suspended until the water has
been completely drained and the washer
shuts off.
CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle.
Once the desired cycle has been select-
ed, the standard presets wilt appear in the
display. These settings can be adjusted
using the cycle setting buttons anytime
before starting the cycle.
NOTE: To protect your clothing, not all
settings are available on all cycle selec-
tions.
C
D
START/PAUSE BUTTON
Press this button to start the selected
cycle. If the washer is running, use this
button to pause the cycle without losing
the current settings.
NOTE: If you do not press the START/
PAUSE button within five minutes of se-
lecting a cycle, the washer automatically
turns OFF and all cycle settings are lost.
Any water remaining in the tub will drain
after a five minute delay.
CYCLE MODIFIER BUTTONS
Use these buttons to adjust the settings
for the selected cycle. The setting lights
above the buttons illuminate to show the
current selection.
E
F
SPECIAL CYCLE AND OPTION BUTTONS
These buttons allow you to select special
cycles or options.
TIME AND STATUS DISPLAY
The display shows the cycle status and
estimated time remaining.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
