LifeSpan Echo User Manual

21
ECHO
1. Adjusting the Running Belt
A
B
C
Place treadmill on a level surface. Run
treadmill at approximately 4km/h, checking the
running condition.
If the belt has drifted to the right:
Whilst the treadmill is running at 4km/h,
carefully turn the right adjusting bolt 1/4 turn
clockwise. Then monitor treadmill until the belt
centers. Repeat until the belt correctly centers.
See Picture A
If you have over adjusted the belt and it drifts
to the right, carefully turn the right adjusting
bolt anticlockwise until the belt centers.
If the belt has drifted to the left:
Whilst the treadmill is running at 4km/h,
carefully turn the left adjusting bolt 1/4 turn
clockwise. Then monitor treadmill until the belt
centers. Repeat until the belt correctly centers.
See Picture B
If you have over adjusted it, carefully turn the
left adjusting bolt anticlockwise and until the
belt centers.
To adjust the tightness of the belt:
Turn the treadmill off. Turn both the left and
right adjusting bolts 1/4 turn clockwise. Repeat
until the belt correctly tightens.
See Picture C
If the belt is over tightened, simply do the
opposite to loosen.

LifeSpan Echo Specifications

General

Brand	LifeSpan
Model	Echo
Category	Treadmill
Language	English