Lightware HDMI-3D-OPT-TX210RAK User Manual

6.7.4. Clear one or more Event(s)
Clear an Event
Press the Clear button in the Event list or in the header section in the Event editor.
Clear all Events
When all the Events must be cleared press the Load factory defaults button above the Event
list. You will be prompted to conrm the process.
6.7.5. Export and import Events
The feature allows saving all the Events. The backup le can be uploaded to another
HDMI-3D-OPT-TX200 series transmitter.
Export all the Events
Step 1. Press the Export button above the Event list.
Step 2. The Save as dialog box will appear. Set the desired folder and le name, then press
the Save button.
The generated le is a simple text le which contains LW3 protocol commands. The le can
be viewed by a simple text editor, e.g. Notepad.
ATTENTION!
Editing the le is recommended only for expert users.
Import all the Events
Step 1. Press the Import button above the Event list.
Step 2. The Open dialog box will appear. Select the desired folder and le, then press the
Open button.
6.8. Settings menu
6.8.1. Status tab
General information is shown on this tab, such as device label, part number, serial number
and hardware health, voltage and temperature values.
Settings menu, Status tab
Page 44 / 106 Software control

Lightware HDMI-3D-OPT-TX210RAK Specifications

General

Brand	Lightware
Model	HDMI-3D-OPT-TX210RAK
Category	Extender
Language	English