12
Chapter 5: Configuring the Router
The Setup Tab - Basic Setup
EtherFast Cable/DSL Router with 4-Port Switch
The Setup Tab - Basic Setup
The Basic Setup screen is the first screen you see when you access the Web-based Utility.
Internet Setup
The Internet Setup section configures the Router for your Internet connection type. This information can be
obtained from your ISP.
Internet Connection Type
The Router supports seven connection types: Obtain an IP automatically, Static IP, PPPoE, RAS, PPTP, HBS, and
L2TP. Each Basic Setup screen and available features will differ depending on what kind of connection type you
select.
Obtain an IP Automatically
By default, the Router’s Internet Connection Type is set to Obtain an IP automatically, and it should be used
only if your ISP supports DHCP or you are connecting through a dynamic IP address.
Figure 5-3: Setup Tab - Basic Setup
(Obtain an IP automatically)
To Next Page
Loading...
Need help?
General
