Linksys LAPAC1200C User Manual

113
If there is no DHCP Server found, the wireless access point will roll back to an IP address and
mask of 192.168.1.252 and 255.255.255.0.
My PC can't connect to the LAN via the wireless access point.
Check the following:
•
The SSID and security settings on the PC match the settings on the access point.
•
On the PC, the wireless mode is set to Infrastructure.
•
If using the Access Control feature, the PC's name and address is in the Trusted Stations
list.
•
If using 802.1x mode, ensure the PC's 802.1x software is configured correctly. See
Appendix C (p. 120
) for details of setup for the Windows XP 802.1x client. If using a
different client, refer to the vendor's documentation.

Linksys LAPAC1200C Specifications

General

Color	multi, white
Wi-Fi Speed	1200 gigabits per second
Wireless Standard	ac, n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	802.1x supplicant; mac-based acl; rogue ap detection; ssid-to-vlan mapping
Ports	other, rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.12 pounds