16
•
If your internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided
by your ISP.
•
If your internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port.
•
If your computer was previously connected to your modem with a USB cable, disconnect the USB cable.
•
Install the router again.
Cannot access your router
message
To access your router, you must be connected to the router’s network. If you have wireless internet access, the problem may be
that you have accidentally connected to a different wireless network.
To fix the problem on Windows computers, do the following*:
1. Click on the wireless icon in the system tray. A list of available networks will appear.
2. Click your own network name. Click Connect. In the example below, the computer was connected to another wireless
network named wraith_5GHz. The wireless network name of the Linksys EA7250 or EA7430 router, Damaged_Beez2.4
in this example, is shown selected.
To Next Page
Loading...
Need help?
General
