13
Method 2: Using the AUX Connection
Use the 3.5 mm to 3.5 mm stereo audio cable (included) to connect the AUDIO OUT /
HEADPHONE socket of the external device (e.g. TV, DVD player, etc.)to the unit’s AUX
socket. Please ensure that the output volume is turned up in order for the soundbar to
operate.
After the connection is complete,
1. Press
button on the unit or remote control to switch on the unit.
2. Press SRC button on the unit repeatedly or press AUX button on the remote control to
select AUX mode.
AC~
SERVICE ONLY
AUX
COAXIAL
OPTICAL
Please refer to the user manual of your TV to change the functionality of your
headphone socket to a line out if possible.
3.5 mm to 3.5 mm Stereo
Audio Cable (included)
AUDIO OUT /
HEADPHONE
Socket
Set-top Box
TV
Rear view of the unit
Blu-ray Player /
DVD Player
Satellite
Receiver
L32SBIN16_IB_Final191216V8.indd 13 17/12/2019 11:08
To Next Page
Loading...
General