Logik L32SBT17 User Manual

14
Connecting to the Mains Supply
• Ensure that the power supply voltage
corresponds to the voltage printed on the back
or the underside of the unit.
• The soundbar are designed to operate with the
supplied mains cable.
• Connecting the main unit to any other power
source may cause damage to the unit. Unwind
the mains cable to their full length.
• Connect the end of the cable to the AC~ socket
at the rear of the unit and then connect the
mains plug to the mains socket. Make sure
the mains plug is fully inserted into the mains
socket.
• Make sure the cable is rmly inserted into the
mains socket. The soundbar is now connected
and ready to use.
• To switch o the soundbar completely, remove
the mains plugs from the mains socket.
Ensure all audio connections of the unit are connected before connecting to the
mains power socket.
AC~
Method 3: Connecting to an external device
Use the 3.5mm to RCA stereo audio cable (not included) to connect the AUDIO OUT
sockets (L/R) of an external device to the unit’s AUDIO IN socket.
1. Press button on the unit or remote control to switch on the unit.
2. Press SOURCE on the unit or remote control repeatedly to select AUDIO IN mode to
play audio from your external device.
Rear view of the unit
Rear view of the unit
Ensure your audio device and soundbar are switched o before connection.
AC~
Red (R)
White (L)
3.5 mm to RCA stereo
audio cable (not
included)
TV
Set-top box
Blu-ray Player / DVD
Player / Recorder
Satellite
Receiver
Game
Console
L32SBT17_IB_Final180629V4.indd 14 29/6/2018 10:33 AM

Logik L32SBT17 Specifications

General

Brand	Logik
Model	L32SBT17
Category	Speakers
Language	English