To Next Page

To Previous Page

Basic Operation

Powering ON/OFF

• Press and hold the STANDBY button to switch the unit on.

• Press and hold the

STANDBY button to switch the unit back to standby mode.

• Disconnect the mains plug from the mains socket if you want to switch the unit o

completely.

Selecting Modes

Press the DAB/FM button repeatedly to switch between modes (DAB or FM).

Adjusting the Volume

Adjust the volume to the desired level by turning the VOLUME/SELECT control.

Setting the Clock

The clock can only set and be updated if you can receive DAB signals in your location. In order

for the clock to synchronise to the current local time you must leave it on one DAB station for a

short period of time. Manual clock setting is not required.

Setting the Alarm (AC Operation Only)

Make sure you have preset FM and DAB stations before setting the Alarm.

1. The unit has two alarms. Press and hold the ALARM1/

ALARM2 button to set alarm 1 or alarm 2. The display will

show “Alarm # Setting” and the hour digits will ash.

2. Turn the VOLUME/SELECT control to adjust the hour

digits and then press the TUNE/SELECT button to

conrm.

3. The minute digits will ash. Turn the VOLUME/SELECT

control to adjust the hour digits and then press the

TUNE/SELECT button to conrm.

4. Turn the VOLUME/SELECT control to select DAB preset

station. Press the TUNE/SELECT button to conrm.

5. Turn the VOLUME/SELECT to select FM preset station.

Press the TUNE/SELECT button to conrm.

6. Turn the VOLUME/SELECT to select Buzzer 1/2. Press the

TUNE/SELECT button to conrm.

7. Turn the VOLUME/SELECT to select the alarm wake up

volume level. Press the TUNE/SELECT button to conrm.

L55DAB10_IB_110810_Zell.indd 9 10/08/2011 10:44 AM

Logik L55DAB10 User Manual

Questions and Answers: