24
Questions and Answers
Issues Reasons Solutions
Washing
machine cannot
start up
• Check if the door is closed tightly.
• Check if power plug is inserted well.
• Check if water supply tap is opened.
• Check if button Start/Pause is pressed.
• Check if button Power is pressed.
Door cannot be
opened
• Machine’s safety
protection design
working.
• Disconnect the power.
Heating fault
• NTC is damaged and
heating pipe is aging.
• Can normally wash the clothes.
• Only cannot wash with heating.
• Shall contact the service center promptly.
Water leakage
• The connection between
inlet pipe or outlet hose
and tap or washing
machine is not tight.
• Drain pipe in the room is
blocked.
• Check and fasten water pipes.
• Clean up outlet hose and ask a
specialized person to repair it when
necessary.
Water is
overflowed
from the
bottom of the
machine
• The inlet pipe is not
connected firmly.
• Outlet hose has water
leakage.
• Fix the inlet pipe.
• Replace the drain hose.
Indicator or
display does
not light
• Power is disconnected.
• PC board has problems.
• Harness has connection
problem.
• Check if the power is shut down and
power plug is connected correctly.
• If not, please call up service line.
Detergent
residues in the
box
• Washing powder
is dampened and
agglomerated.
• Clean and wipe the box.
• Use liquid detergents or the detergents
special for drum.
Washing effects
are not good
• The clothes are too dirty.
• Insufficient detergent
quantity.
• Select a proper procedure.
• Add the proper detergent quantity
according to the instructions in detergent
package.
Abnormal noise
Great vibration
• Check if the fixing (bolts) has been
removed.
• If cabinet is installed on th solid and level
floor.
• Check if there are any brrettes or metal
articles inside.
• Check if the legs in the washing machine
are adjusted level. See page 9.
L712WM_S13_IB_RC_140108_Zell.indd 24 8/1/14 10:35 am
To Next Page
Loading...
Need help?
General
