23
The programme has
been interrupted for no
reason.
• The loading door might not
be closed properly.
• Make sure that the loading door is
properly closed.
• There might have been a
power failure.
• Press the Start/Pause button to start the
programme.
• The water tank might be full. • Empty the water tank.
Clothes have shrunk,
felted or deteriorated.
• The programme used might
not be suitable for the type
of laundry.
• Check the care labels on the laundry
items, select a suitable programme for
the type of laundry.
Water leaking from
the loading door.
• There might be lint
accumulated on the inner
surfaces of the loading
door and on the surfaces
of the gasket of the
loading door.
• Clean the inner surfaces of the
loading door and the surfaces of
the gasket of the loading door.
The loading door
opens on its own.
• The loading door might
not be closed properly.
• Push the loading door until you
hear the clicking sound.
The water tank
indicator is on.
• The water tank might be
full.
• Empty the water tank.
The Lint filter
indicator is on.
• The lint filter is be full. • Clean the filter.
The condenser
indicator is on.
• The condenser might be
clogged.
• Wash the condenser.
Logik Condenser Tumble Dryer LCD7W18 Manual.indd 23Logik Condenser Tumble Dryer LCD7W18 Manual.indd 23 16/09/2021 16:1616/09/2021 16:16
To Next Page
Need help?
General
