10
Using the Grill
Function Description
Grill Function
This function is used for grilling. In order to grill, please use the
grill pan supplied with your product. Turn your grill’s control to
the required setting.
At the end of grilling, as in all other cooking processes; turn the
control to the “0” position (off). Take the grill pan out by using the
supplied handle and put the pan onto a safe place. Keep children
away from the hot oven during and after grilling, until it has
completely cooled down.
Place an oven shelf in either guide slot 1 or 2 position.
There must be at least 30 mm between the food and the
element.
Using the handle, insert the grill rack and tray onto the
shelf in guide slot 1 or 2. The food to be cooked must be
placed on the grill rack in the grill tray. The handle can be
removed once the grill rack tray is in position. Check the
food regularly to ensure you do not overcook it.
The grill pan has a detachable handle. Ensure when using
the grill pan handle that it is centralised and secure as
shown below.
Preheat the grill element for approximately 5-10 minutes before cooking the food.
Ensure a minimum distance of 30 mm exists between the food and the elements. If necessary use a lower guide
slot.
Check the food regularly to ensure you do not overcook the food. If slower cooking is required use a lower guide
slot or lower grill setting.
Guide 2
Grill Tray
Oven shelf
Guide 1
0
1
2
3
4
5
6
• The Grill door must be kept open during this function. The door has a position in which the door is
open at 30°. This is the minimum the door can be closed during use.
• During use the appliance becomes hot. Care should be taken to avoid touching the heating
elements inside the grill.
Do not leave the handle in position when
grilling. If the handle is left in position when
grilling, it will get very hot.
Bread may catch fire if the toasting time is too long. Close supervision is necessary during toasting.
LFSTC50W_IB_110420.indd 10 20/04/2011 3:48 PM
To Next Page
Loading...
Need help?
General
