19
Adding the Delicate Option to a Programme
Although your dryer has a preset Delicate programme you can also add the Delicate option to
some of the other programmes. Adding the delicate option will reduce the temperature of the
cycle and add extra time.
1. Select your desired Programme.
2. Press the Delicate button, the delicate indicator will light and the dryer will beep to show
the option has been selected. If the indicator light ashed the option is not available for you
drying programme you have selected.
3. Press Start/Pause to start the drying cycle.
Setting a Delay Timer
You can delay the start time of your drying cycle by 3, 6 or 9 hours.
1. Select your desired drying programme.
2. Press the Delay Timer button to select your desired delay time. Continually press the button
to cycle through the delay times 3 - 6 - 9 - Delay O. The Delay Timer indicator will light next
to the time you have selected.
3. Press Start/Pause to start your programme. The delay time indicator will start to ash, this
indicates that the dryer is counting down and will start in 3, 6 or 9 hours.
If you decide you want to turn the delay timer o simple press the Delay Timer button. The delay
timer indicator will switch o. Then press the Start/Pause button to start your cycle.
Switching the Beep o
If you wish you can switch the beeping sound o.
• Press and hold the Delicate button for 3 seconds your dryer will beep which indicates the
beep is now switched o. You now won’t hear any beeping from the dryer when selections
are made or the drying cycle ends.
• To switch the beep back on, press and hold the Delicate button again.
Adding the Anti-crease Option to a Programme
Every programme has an anti-crease cycle at the end of the programme for 1 hour, selecting
Anti-crease will add an extra hour of gentle tumbling to the end of your selected programme.
1. Select your desired programme using the programme dial.
2. Press the Anti-crease button, you will hear a beeb and the anti-crease indicator will light.
If you press the Start/Pause button or open the door while the anti-crease process is active this
will stop the process. You can also switch Anti-crease o by pressing the Anti-crease button, you
will hear a beeb and the anti-crease indicator will switch o.
Logik 8 kgs Heat Pump Tumble Dryer LHP8W22 Manual.indd 19Logik 8 kgs Heat Pump Tumble Dryer LHP8W22 Manual.indd 19 26/09/2022 15:1726/09/2022 15:17
To Next Page
Loading...
Need help?
General
