English - 25 -
Country
Language
PLEASE CHECK ANTENNA CABLE
AUTO PROGRAMMING SYSTEM
TXT Language
Select your Country, Language and Text
language
by using or and
buttons.
Press
OK or RED button to continue. To cancel,
press
BLUE button. The following menu will
be displayed during the automatic tuning:
UK
After APS is finalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers
and names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them in
the program table.
Configuration
Press the M button to display the main menu
and press the
button twice to highlight
Configuration. Then press the
OK button to
display the configuration menu. Press the
MENU button to leave the menu screen.
Main Menu
Channel List
Installation
Timers
Language
TV Setup
Common Interface
The various configuration functions are
displayed in a list, along with a quarter-screen
image of the currently selected channel. You
can select a function by highlighting the
corresponding menu line using the or
button. Configuration menu will look like this:
Audio Language
Subtitle
Favourite Mode
EPG Preference
Receiver Upgrade
English
Off
Off
Now&Next
V.1.5
Change Default Audio Language
More
Audio Language
Digital terrestrial television channels can
broadcast simultaneous soundtracks in more
than one language. This function selects
which language soundtrack you will hear
when switching to a channel broadcasting with
the multiple soundtracks.
Highlight the
Audio Language line in the
Configuration menu and use the or
button to cycle through the language options.
Subtitle
Digital terrestrial television channels can
broadcast subtitles displayed on the screen
ENG-32782W-1050 UK-32INCH-17MB12 UK IDTV-(2 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50117669.p6508.10.2007, 11:0225
To Next Page
Loading...
Need help?
General
