To Next Page

To Previous Page

Location

When selecting a position for your unit make sure the floor is flat and firm, and that the

room is well ventilated with an average room temperature of between 16°C and 32°C. Avoid

locating your unit near a heat source, e.g. a cooker, boiler or radiator. Avoid direct sunlight.

If you are placing your unit in an outbuilding such as a garage or annex ensure that the unit

is placed above the damp course, otherwise condensation will occur on the cabinet. Never

place the unit in a wall recess or into fitted cabinets or furniture.

When installing the unit, ensure that 5 inches of free space is left at both sides, 5 inches at

the rear and 100 mm at the top of the unit. This will allow cold air to circulate around the

wine cooler and improve the efficiency of the cooling process. The door can open to the

right or the left, depending on what better suits the location. Please ensure there is adequate

space for the door to fully open.

• If you want to have the door swing reversed, we recommend that you contact a

qualified technician. You should only try to reverse the door yourself if you believe

that you are qualified to do so.

• Ensure the unit is unplugged and empty.

• Adjust the two levelling feet to their highest position.

• To take the door off it is necessary to tilt the unit backwards. You should rest the

unit on something solid so that it will not slip during the door reversing process.

• All parts removed must be saved to reinstall the door.

• Do not lay the unit flat as this may damage the coolant system.

• We recommend that 2 people handle the unit during assembly.

1. Tilt the unit slightly towards the rear and

prop it securely. Two people are required

to tilt the unit during the door reversal

process.

Allow the unit to stand upright for at least 2 hours before connecting it to the

mains.

Reversing the Door Swing

Tools required: Phillips style screwdriver / Flat bladed screwdriver / Hexagonal spanner.

Installation

INSTALLATION

LWC59B12_IB_Running Change_120822_Edits_Pauline.indd 5 22/08/2012 11:58 AM

Logik LWC59B12 User Manual

Questions and Answers: