EasyManuals Logo
Home>Logik>Ice Maker>MZB 15 SS

Logik MZB 15 SS User Manual

Logik MZB 15 SS
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
4
3. Parts and Description
1. Cover: With a transparent window to allow interior visibility.
2. Ice Scoop
3. Ice Shovel
4. Control Panel
5. Ice Basket
6. Fan Vent
7. Water Drain Cap:
To drain
water from
the reservoir
1
2
3
4
5
6
7
Control Panel
A) “Add Water” Indicator Light
B) Selection Button
C) Power Button
(to turn unit on and off)
D) “Full Ice” Indicator Light
E) Ice Size Indicator Light
L = Large Size Cubes
M = Medium Size Cubes
S = Small Size Cubes
Ice Maker
ADD WATER
FULL ICE
L
M
S
SELECT
ON/OFF
A
B
C
D
E
4. Operating Procedures & Maintenance
A. Unpacking your Ice Maker
1. Remove the exterior and interior packaging. Check that the ice basket
and ice scoop are included. If any parts are missing, please contact
our customer service centre.
2. Clean the interior with lukewarm water and a soft cloth. Take out the
basket and clean it.
3. Find a location for your ice maker that is protected from direct sunlight
and other sources of heat (i.e: stove, furnace, radiator). Place the ice
maker on a level surface. Make sure that there is at least 13 cm of
space between the back and sides of your ice maker and the wall.
4. Allow at least one hour for the refrigerant fluid to settle before plugging
ice maker in.
5. The appliance must be positioned so that the plug is accessible.
B. Connecting your Ice Maker
* Improper use of the earthed plug can result in the risk of electrical shock.
If the power cord is damaged please call our customer service centre.
1. This unit should be properly earthed for your safety. The power cord
of this appliance is equipped with a three prong plug which mates with
a standard three prong wall outlet to minimize the possibility of electric
shock.
2. Plug your appliance into an exclusive, properly installed, earthed wall
outlet. Do not under any circumstances, cut or remove the third (earth)
prong from the power cord. Any questions concerning power and/or
earthing should be directed toward a certified electrician.
3. This appliance requires a standard 220 ~ 240 volt, 50Hz electrical
outlet with three prong earth.
Before using your ice maker, it is strongly recommended to clean it
thoroughly
DANGER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik MZB 15 SS and is the answer not in the manual?

Logik MZB 15 SS Specifications

General IconGeneral
BrandLogik
ModelMZB 15 SS
CategoryIce Maker
LanguageEnglish

Related product manuals