English 11
Logitech® Wireless Headset H800
Help with setup
Something not sound right? No sound at all? Microphone not working?
• Try moving the headset closer to the Nano receiver. The wireless connection status light on the
headset turns solid green when the headset is in range (up to 40ft/12 m) with the Nano receiver.
See the wireless performance table below for Nano receiver placement tips.
• When using with the Nano receiver, the Device Selection switch on the headset should be set
to the last position.
• Make sure the headset is the active input/output audio device in both your application and
operating system. For more information, see Test the headset.
• Adjust the volume and microphone settings to an audible level in both your application and
operating system.
• Quit and restart your media application.
• If you’re using a USB hub (powered or un-powered), try plugging the Nano receiver directly
into your computer.
• Try using the headset with another computer.
Headset not charging?
• Use the provided USB charging cable. Connect the cable to the charging port on the headset,
and connect the other end of the cable to a USB port on your computer.
• If you are using a USB hub, connect the charging cable directly to a USB port on your computer.
• If the battery status light on the headset is not amber (solid or flashing), the headset is
not receiving power from your computer’s USB port. Try another USB port on your computer,
and then turn on or wake up your computer to charge the headset.
Music controls not working?
• Music controls for applications other than iTunes® and Windows Media Player® are not supported.
• If you use Windows®, you can download an optional software enhancement from
www.logitech.com/support to improve music control.
• Some functions of the headset may not be supported depending on the tablet, smartphone and/
or application.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
