To set a button to send a command to more than one device at a time:
1. Select a command from the drop-down list in each of the required device columns next to the
name of the button that you want to set.
Adding Custom Labeled Buttons
You can also add any number of custom-labeled buttons to an activity.
To add custom-labeled buttons:
1. Go to your Harmony home page.
2. Click Customize next to the appropriate activity.
3. Click Change the Behavior of Buttons.
To add a custom-labeled button for an Activity:
1. Type a the label you would like to appear on the LCD.
2. Select a command from the drop-down list in the appropriate device column, next to the name
of the button you want to set.
3. Click Picture or Sound to view and add custom buttons within the Sound or Picture mode of
this activity.
4. Click Save.
Custom-labeled buttons appear in the LCD (from left to right, top to bottom).
Add a custom-labeled button to send a command to more than one device at a time:
1. Select a command from the drop-down list in each of the required device columns next to the
name of the button you want to set.
2. Add as many custom-labeled buttons as you like. Click More Custom Labels to add labels one
at a time.
3. When you update your Harmony remote, click NEXT to view all of your custom-labeled
buttons a page at a time.
To Next Page
Loading...
Need help?
General
