Logitech UE User Manual

Logitech UE Air Speaker
66 English
Set up AirPlay using
acomputer (optional)
1. Connect the AC power supply.
Turn on the speaker. Wait until power-
on finishes before proceeding.
(Power-on takes 35 seconds.)
2. Press and hold the Wi-Fi Connect button
for more than 5 seconds. After 35 seconds
the Status indicator changes from slow
blinking green to fast blinking green to
indicate that setup mode is ready.
3. Open Wi-Fi network settings on
your computer. Select the network called
“Air Speaker Setup”. (For Wi-Fi help refer
to your computer documentation.)
4. Launch an Internet browser.
Enter http://192.168.1.12 in the address bar.
A configuration page launches.
5. Follow the on-screen instructions. Be ready
to select your Wi-Fi network and to enter
your password. The speaker will restart.
The Status indicator will turn solid green
after the Wi-Fi connection is made.
Your computer should automatically
reconnect to your Wi-Fi network.
If not, you will need to reconnect it
manually.
Note: If the Status indicator changes to
slow blinking orange, the speaker did not
connect to your Wi-Fi network. Please visit
www.logitech.com/support/airspeaker
for help and try again.
Playing music
The speaker plays music from only one device
at a time. To switch devices, stop the
current device before playing music on
another device.
AirPlay with iOS device (wireless)
1
1. Make sure Wi-Fi is turned on for your iOS
device and your iOS device is connected
to the same network as the Air Speaker
2. Tap the iPod app or a music app.
3. Find the AirPlay icon and tap it.
4. Choose the Air Speaker from the list
of speakers.
5. Select a song or track to play it.
1
You can also dock your iOS device.

Logitech UE Specifications

General

Brand	Logitech
Model	UE
Category	Speakers
Language	English